Further to the road traffic accident involving this Grade II listed bridge, the existing stonework was recovered, examined, and sawn down so that as much original material as possible could be retained and reused. Any shortfall was supplemented with new stone carefully selected to match the existing. All stone was then transported back to site and reinstated within a controlled, traffic‑managed working area. The rebuilt sections were fixed and pointed in lime mortar, with a s

Sympathetic cleaning was carried out using a non‑invasive steam‑cleaning technique to remove algae and surface detritus. Due to the nature of the fountain, this process revealed a significant build‑up of limescale. The next stage of the restoration will involve repointing the open joints and removing the limescale, with the aim of reinstating the fountain after several years of being out of operation. For more information about our services, visit our main page September 7th

This is a job we recently completed. All the porch stonework was carefully removed using mechanical lifting methods, with each stone numbered and recorded on elevation drawings before the old mortar was cleaned off. Repairs were completed while the stones were on the ground, and new foundations were dug and concreted in line with the structural engineer’s design. The stonework was then rebuilt in its original order onto the new foundation, fixed and pointed with lime mortar,

This is a job we recently completed. All the porch stonework was carefully removed using mechanical lifting methods, with each stone numbered and recorded on elevation drawings before the old mortar was cleaned off. Repairs were completed while the stones were on the ground, and new foundations were dug and concreted in line with the structural engineer’s design. The stonework was then rebuilt in its original order onto the new foundation, fixed and pointed with lime mortar,

This is a job we recently completed. All the porch stonework was carefully removed using mechanical lifting methods, with each stone numbered and recorded on elevation drawings before the old mortar was cleaned off. Repairs were completed while the stones were on the ground, and new foundations were dug and concreted in line with the structural engineer’s design. The stonework was then rebuilt in its original order onto the new foundation, fixed and pointed with lime mortar,

This is a job we recently completed. All the porch stonework was carefully removed using mechanical lifting methods, with each stone numbered and recorded on elevation drawings before the old mortar was cleaned off. Repairs were completed while the stones were on the ground, and new foundations were dug and concreted in line with the structural engineer’s design. The stonework was then rebuilt in its original order onto the new foundation, fixed and pointed with lime mortar,

This is a job we recently completed. All the porch stonework was carefully removed using mechanical lifting methods, with each stone numbered and recorded on elevation drawings before the old mortar was cleaned off. Repairs were completed while the stones were on the ground, and new foundations were dug and concreted in line with the structural engineer’s design. The stonework was then rebuilt in its original order onto the new foundation, fixed and pointed with lime mortar,

We were recently instructed to carry out the restoration of these attic windows. The works involved targeted refurbishment of the window assembly and associated weathering components. Localised areas of deteriorated timber were cut out and replaced with pieced‑in sections that replicated the original profiles and grain orientation, maintaining structural integrity and continuity with the historic fabric. The existing window units underwent a full overhaul, including restorati

We were recently instructed to carry out the restoration of these attic windows. The works involved targeted refurbishment of the window assembly and associated weathering components. Localised areas of deteriorated timber were cut out and replaced with pieced‑in sections that replicated the original profiles and grain orientation, maintaining structural integrity and continuity with the historic fabric. The existing window units underwent a full overhaul, including restorati

We were recently instructed to carry out the restoration of these attic windows. The works involved targeted refurbishment of the window assembly and associated weathering components. Localised areas of deteriorated timber were cut out and replaced with pieced‑in sections that replicated the original profiles and grain orientation, maintaining structural integrity and continuity with the historic fabric. The existing window units underwent a full overhaul, including restorati